User Manual

165
Product Manual WebPAM PROe - System Conguration
MAking snMP settings
To change SNMP service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SNMP service and click the Settings button.
4. Make settings changes as required:
• Chooseastartuptype,
Automatic–(default)Startsandrunswiththesubsystem.
Manual–Youstarttheservicewhenyouneedit.
• PortNumber–Defaultis161.
• SystemName–Nodefault.
• SystemLocation–DefaultisUSA.
• SystemContact–Defaultis[e-mail].
•
ReadCommunity–Defaultispublic.
• WriteCommunity–Defaultisprivate.Nochangesarepossible.
5. Click the Save button.
6. Click the Conrm button.
Adding An snMP trAP sink
To add a trap sink:
1. Click the Administration tab.
2. Click the Services icon.
3. Click SNMP service and click the Settings button.
4. EnteratrapsinkserverIPaddressintheeldprovided.
5. Chooseatraplter(eventseveritylevel).See“Event Severity Levels” on page 169.
6. Click the Add button.
7. Click the Conrm button.