User Manual

133
Product Manual WebPAM PROe - System Conguration
ViewiNg ups iNForMatioN
ToviewinformationaboutaspecicUPS unit:
1. Click the Device tab.
2. Click the UPS icon.
3. Mouse-over UPS and click the View button.
UPS information includes:
• UPS ID
• Model Name
• Serial Number
• Firmware Version
• Manufacture Date
• Voltage Rating
–OutputvoltageoftheUPS.
• Battery Capacity–Backupcapacityexpressedasapercentage.
• Remaining Backup Time–NumberofminutestheUPSisexpected
topoweryoursystemintheeventofapowerfailure.
• Loading Ratio–ActualoutputofUPSasapercentage
oftheratedoutput.SeetheNotebelow.
• Temperature–ReportedtemperatureoftheUPSunit.
Note
The maximum recommended Loading Ratio varies among models of UPS units.
The general range is 60% to 80%. If the reported Loading Ratio exceeds the
recommended value for your UPS unit:
Have fewer subsystems or peripherals connected to this UPS unit.
AddmoreUPSunits,oruseahigher-capacityUPSunit,toprotectyourRAID
systems.