User Manual

126
Vess R2000 Series Product Manual Promise Technologies
ViewiNg eNClosure iNForMatioN
To view enclosure information:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
Enclosure information includes:
ForinformationonEnclosureproblems,See “Diagnosing an Enclosure Problem” on page 622.
MakiNg eNClosure settiNgs
To make Enclosure settings:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the Settings button.
Enclosure settings include:
• EnclosureWarningTemperatureThreshold[56-60]°C
• EnclosureCriticalTemperatureThreshold[61-73]°C
• ControllerWarningTemperatureThreshold[76-80]°C
• ControllerCriticalTemperatureThreshold[81-85]°C
4. Intheeldprovided,typethetemperatureindegreesCforeachthresholdvalue.
5. Click the Save button.
•
EnclosureID
• EnclosureType
• EnclosureWarningTemperatureThreshold
• ControllerWarningTemperatureThreshold
• MaxNumberofControllers
• MaxNumberofFans
• MaxNumberofTemperatureSensors
• MaxNumberofBatteries
• EnclosureCriticalTemperatureThreshold
• ControllerCriticalTemperatureThreshold
• MaxNumberofPhysicalDriveSlots
• MaxNumberofBlowers
• MaxNumberofPowerSupplyUnits
• MaxNumberofVoltageSensors