User Manual

119
Product Manual WebPAM PROe - System Conguration
ViewiNg battery iNForMatioN
Batteriesmaintainpowertothecontrollercacheintheeventofapowerfailure,thusprotectinganydatathat
has not been written to a physical drive.
To view battery information:
1. Click the Device tab.
2. Click the Component List icon.
3. Clickthebatteryyouwant,thenclicktheView button.
Battery information includes:
• BatteryID
• Operationalstatus–Fullycharged,reconditionmeansareconditioningisinprocess
• Batterychemistry–LiON,etc.
• Remainingcapacity–Batterycapacityasapercentage
• Batterycelltype–Numberofcells
• Estimatedholdtime–Timeinhoursthatthebatterycanpowerthecache
• Estimatedbackupcycle-ForAdvancedBatteryFlashBackup,this
isthenumberoftimestheWriteCachecanbesavedfromDRAM
toFlashmemorygivencurrentbatterycapacityremaining.
• Temperaturethresholddischarge–Maximumtemperature
allowedwhenthebatteryisdischarging
• Temperaturethresholdcharge–Maximumtemperature
allowedwhenthebatteryischarging
• Batterytemperature–Actualbatterytemperature
• Cyclecount–Numberoftimesthebatterywasreconditioned
• Voltageinmillivolts
• Currentinmilliamps