User Manual

118
Vess R2000 Series Product Manual Promise Technologies
Warning
Do NOT power off the RAID subsystem during the update!
DoNOTmovetoanyotherscreenuntilthermwareupdateoperation
is completed!
Whentheupdateiscompletedamessagetellsyoutorebootthesubsystem,
8. Click the OK button.
• IfyouchosetheDisruptiveFlashMethod,theRAIDsubsystem
andJBODexpansionunitsautomaticallyrestart.
• IfyouchosetheNon-DisruptiveFlashMethod,thesystemautomatically
ashesandrestartstheRAIDcontrollersoneatatime.
AutOMAtic restArt
IfyoudidNOTchecktheNDIUbox,theRAIDsubsystemandJBODexpansionunitsautomaticallyrestart.That
action temporarily disrupts I/O operations and drops your WebPAM PROe connection.
To reestablish your WebPAM PROe connection:
1. Wait no less than two minutes.
2. Click LogoutintheWebPAMPROeHeader,thenloginagain.
Ifyoucannotlogin,wait30secondsandtryagain.
3. Inyourbrowser,clickLogoutintheWebPAMPROeHeader,thenloginagain.
Ifyoucannotloginimmediately,wait30secondsandtryagain.