User Manual

Table Of Contents
116
Vess R2000 Series Product Manual Promise Technologies
loCatiNg a CoNtroller
This feature causes the controller LEDs to blink for one minute to assist you in locating the controller on a RAID
subsystemorJBODexpansionunit.
To locate a controller:
1. Click the Device tab.
2. Click the Component List icon.
3. Clickthecontrolleryouwant,thenclicktheLocate button.
The controller status LEDs blink for one minute.
ViewiNg the Flash iMage iNForMatioN
To view theashimageinformationfortheRAIDsubsystemenclosure:
1. Click the Administration tab.
2. Click the Image Version icon.
3. Click the Enclosure you want to See and click the triangular button.
RAIDsubsystemshavethefollowingcomponentsintheirashimage:
• Kernel
• Firmware
• Software
• Ramdisk
•
SEPFirmware
• OEMCustomization
• BIOS
•
6GExpander
• SystemLibraries
• Applications
•
MountScripts
• PLXEEPROMImage
• SASExpander
• NASAPP
• Running
–Theversionthatiscurrentlyrunningonthesubsystemorexpansionunit.
• Flashed–Thisversionwasupdatedbutdoesnotrununtilthesubsystemrestarts.
See“Updating Firmware on a RAID Subsystem” on page 117
JBODexpansionunitshaveonlyonecomponentintheirashimage,SEPrmware.Itonlyappearsasrunning.