User Manual

Table Of Contents
113
Product Manual WebPAM PROe - System Conguration
4. Click the Advanced Information tab.
Advanced controller information includes:
• Slot1MemoryType
• Slot2MemoryType
• LUNAfnity*
• ControllerRole
• FlashSize
• NVRAMSize
• Coercion*
• SMART*
• WriteBackCacheFlushInterval*
• AdaptiveWritebackCache*
• ForcedReadAhead(cache)*
• PowerSavingStandbyTime*
• CacheLineSize
• BackupFlashStatus
• PerfectRebuildAvailable
• Slot1MemorySize
• Slot2MemorySize
• ALUA*
• FlashType
• NVRAMType
• PreferredCacheLineSize
• CoercionMethod*
• SMARTPollingInterval*
• EnclosurePollingInterval*
• HostCacheFlushing*
• PowerSavingIdleTime*
• PowerSavingStoppedTime*
• AdvancedBatteryFlashBackupEnabled*
• BackupFlashSize
• ApplianceMode
Items with an asterisk (*) are adjustable under Controller Settings.
MakiNg CoNtroller settiNgs
Inadual-controllerRAIDsubsystem,settingsmadetoonecontroller are applied to both controllers.
To make controller settings:
1. Click the Device tab.
2. Click the Component List icon.
3. Clickthecontrolleryouwant,thenclicktheSettings button.