User Manual

110
Vess R2000 Series Product Manual Promise Technologies
shuttiNg dowN the subsysteM
This function shuts down the RAID subsystem without restarting it.
To shutdown the subsystem:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Choose the option to apply the shutdown to the Subsystem,Controller 1 only or Controller 2 only
4. Click the Shutdown/Restart button.
5. Click the Shutdown button.
6. Type the word “ conrm ”intheeldprovided.
7. Click the Conrm button.
Whenthecontrollershutsdown,yourWebPAMPROeconnectionislost.
8. Wait at least two minutes.
Important
IfyourRAIDsubsystemmanagesJBODexpansionunits,youmustfollow
the proper startup procedure.
restartiNg the subsysteM aFter a shutdowN
To start the RAID subsystem:
1. Press the Power button on the front left side of the device being restarted.
2. Wait at least two minutes.
3. Open your browser and log into WebPAM PROe.
Ifyoucannotloginimmediately,wait30secondsandtryagain.