User Manual

109
Product Manual WebPAM PROe - System Conguration
restartiNg the subsysteM
This function shuts down the subsystem and then restarts it.
To restart the subsystem:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Choose the option to apply the restart to the Subsystem,Controller 1 only or Controller 2 only.
4. Click the Shutdown/Restart button.
5. Click the Restart button.
6. Typetheword“conrm”intheeldprovided.
7. Click the Conrm button.
Whenthecontrollershutsdown,yourWebPAMPROeconnectionislost.
8. Wait at least two minutes.
9. Inyourbrowser,clickLogoutintheWebPAMPROeHeader,thenloginagain.
Ifyoucannotloginimmediately,wait30secondsandtryagain.