User Manual

101
Product Manual WebPAM PROe - System Conguration
MakiNg subsysteM settiNgs
To make subsystem settings:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Click the Settings button.
4. Make changes as required:
• Enteranaliasorchangetheexistingaliasintheeldprovided.
• Choosearedundancytypefromthedrop-downmenu.
ThechoicesareActive-ActiveandActive-Standby
•
ChecktheboxtoenableCache Mirroring (orunchecktodisable)
5. Click the Save button.
loCkiNg or uNloCkiNg the subsysteM
Thelockpreventsothersessions(includingsessionswiththesameuser)frommakingacongurationchange
to the controller until the lock expires or a forced unlock is done. When the user who locked the controller logs
out,thelockisautomaticallyreleased.
setting the lOck
To set the lock:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Click the Lock / Unlock button.
4. IntheLockTimeeld,typealocktimeinminutes.
1440 minutes = 24 hours
5. Click the Lock button.