User Manual

autoMatiC CoNFiguratioN
When you choose the Automatic option, the following parameters appear on the screen:
• Disk Arrays–Thenumberoflogicaldrives,numberofphysicaldrives,IDofeachphysicaldrive,
congurablecapacity,andthemediatype(harddiskdrivesorsolidstatedrives).
• Logical Drives–TheIDnumbersofthelogicaldrives,theirRAIDlevels,capacity,sectorsize,andstripe
size.
• Spare Drives
–TheIDnumbersofthelogicaldrives,type(globalordedicated)revertibleoption(enabled
ordisabled)andmediatype.AhotsparedriveiscreatedforallRAIDlevelsexceptRAID0,whenveor
moreunconguredphysicaldrivesareavailable
If you do NOT accept these parameters, use the Express or Advanced option to create your disk array.
If you accept these parameters, click the Submit button, and then click the Finish button.
The new disk array appears in the Disk Array List on the Storage tab, Disk Array option.
Automatic conguration menu
85
Product Manual Setup