Product manual

Chapter 8: Maintenance

325

5. Remove the battery assembly attaching screw on the outside of the RAID

controller housing.

6. Detach the battery connector and remove the battery assembly.

Figure 8. RAID Controller cache battery

7. Attach the connector of the new battery assembly.

Be careful to line-up the connector pins correctly. See Figure 9.

Figure 9. Battery connector pins

8. Put the battery assembly into place and install the attaching screw.

9. Replace the RAID controller cover and install the two attaching screws.

Slot

Attaching

screw (on

controller

housing)

Connector

Battery

assembly

Battery

Row A

Row B

Row A