Product manual

Managing Disk Arrays

309

• Transport Ready – This function is not supported in the LCD panel. See

“Preparing a Disk Array for Transport” on page 166 (WebPAM PROe) or

page 236 (CLU).

Locating a a Logical Drive

This function requires the LCD to be in Advanced mode. See page 292. This

feature helps you identify the physical drives assigned to the logical drive.

To locate a logical drive:

1. Press the or button until the display says Logical Disk Management.

2. Press the button to display a list of logical drives by ID number.

3. Press the or button to scroll through the list of logical drives.

4. Press the button choose a logical drive.

5. Press the or button until the display says Locate Logical Drive.

6. Press the button. The disk status LEDs for the physical drives in the

logical drive blink for one minute. See Figure 4.

Figure 4. Disk Status LED

Disk Status

Plus carrier

Original carrier