Product manual

291
Chapter 7: Management with the LCD Panel
This chapter covers the following topics:
• Using the LCD Panel (below)
• Perusing the Interface (page 292)
• Managing the Network Connection (page 295)
• Managing the Controller (page 297)
• Managing Enclosures (page 298)
• Managing Physical Drives (page 299)
• Managing Disk Arrays (page 300)
• Managing Spare Drives (page 310)
Using the LCD Panel
The LCD panel is optional and typically installed during VessRAID installation.
See page 12.
The LCD panel activates approximately 35 seconds after you switch on the
VessRAID’s power supply.
At first, the LCD screen displays
System is Initializing .
When the VessRAID is fully booted and running under normal conditions, the
LCD screen displays the VessRAID model number and IP address, as shown in
Figure 1.
Figure 1. LCD default display
If the LCD panel displays Check Event, see “Chapter 10: Troubleshooting” on
page 365 for more information on diagnosing the issue.