Product manual

VessRAID 1000f, 1000i, 1000s Product Manual
254
LIP, LPB, and LPE are primitive sequences used in the Arbitrated Loop
topology for initializing the loop and enabling or disabling an L_Port.
• InvalidWordSentCount – Number of invalid words sent since last reset.
• InvalidCRCCount – Invalid Cyclical Redundancy Count. Number of frames
received with an invalid CRC since last reset.
• InitiatorIOCount – I/O Count on the initiator on the host side.
Clearing Statistics
To clear statistics, see “Clearing Statistics” on page 282.
Viewing Fibre Channel Initiators
LUN Mapping must be enabled in order for VessRAID to recognize a Fibre
Channel. See “Enabling LUN Mapping” on page 268.
To view Fibre Channel initiators:
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Initiators and press Enter.
A list of all currently logged-in initiators appears on the screen.
Adding a Fibre Channel Initiator
LUN Mapping must be enabled in order for VessRAID to add a Fibre Channel.
See “Enabling LUN Mapping” on page 268.
You must add an initiator to the VessRAID’s initiator list in order to use the
initiator to create a LUN for your logical drive.
To add an initiator:
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Initiators and press Enter.
3. Highlight the initiator you want to add and press the spacebar to choose it.
4. Highlight Add Marked Initiators and press Enter.
The initiator is added to VessRAID’s initiator list.