Product manual

VessRAID 1000f, 1000i, 1000s Product Manual
218
3. Highlight the controller you want and press Enter.
4. Highlight Controller Settings and press Enter.
5. Make the following settings as required:
• Type and alias into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between words
and underscore. An alias is optional.
• Highlight Host Cache Flushing and press the spacebar to toggle
between Enabled and Disabled.
• Highlight Coercion and press the spacebar to toggle between Enabled
and Disabled.
• Highlight Coercion Method and press the spacebar to toggle through:
GB Truncate – Reduces the capacity to the nearest 1 GB boundary
10 GB Truncate – Reduces the capacity to the nearest 10 GB boundary
Grp (group) Rounding – Uses an algorithm to determine truncation.
Results in the maximum amount of usable drive capacity
Table Rounding – Applies a predefined table to determine truncation
• Highlight Adaptive Writeback Cache and press the spacebar to toggle
between Enabled and Disabled.
• Highlight Forced Read Ahead (cache) and press the spacebar to toggle
between Enabled and Disabled.
• Highlight Cache Flush Interval and press the backspace key to erase
the current value. Type a new interval value (1 to 12 seconds).
• Highlight Physical Drive Temperature Threshold and press the
backspace key to erase the current value. Type a new value (50° to
60°C).
• Highlight NCQ and press the spacebar to toggle between Enable and
Disable.
• Highlight SMART and press the spacebar to toggle between Enable and
Disable.
• Highlight SMART Poll Interval and press the backspace key to erase the
current value. Type a new interval value (1 to 1440 minutes).
• Highlight Poll Interval and press the backspace key to erase the current
value. Type a new interval value (15 to 255 seconds).
• Highlight Power Saving Level and press the backspace key to erase the
current value. Type a new value (0, 1, 2, or 3).
0 disables the feature. The read/write heads never park.
1 parks the read/write heads after the specified period of HDD Idle Time.