Product manual

Chapter 6: Management with the CLU
215
Setting the Subsystem Time Zone
This feature enables you to specify the time zone for the geographic location of
the VessRAID subsystem.
To set the time zone for this subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Modify System Time Zone and press Enter.
3. Highlight Time Zone and press the backspace key to erase the current
value.
4. Type in a new value.
Enter a plus or minus sign and the number.
5. Press Ctrl-A to save your settings.
Setting Subsystem NTP
Network Time Protocol (NTP) synchronizes the VessRAID subsystem to as NTP
server. After you have made NTP settings, the VessRAID subsystem
synchronizes:
• At startup.
• Every night.
• When you synchronize manually.
To set a Network Time Protocol (NTP) for this subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight NTP Management and press Enter.
3. Highlight NTP Settings and press Enter.
4. Highlight NTP Service and press the spacebar to toggle to Enable.
5. Highlight Time Servers and input the URLs for NTP servers in the spaces
provided
One URL is required. Additional URLs are optional.
6. Highlight Time Zone and press the backspace key to erase the current
value.
7. Type in a new value, a plus or minus sign and the number.
8. If your location observes Daylight Saving Time:
• Highlight Daylight Saving Time and press the spacebar to toggle to
Enable.
• Highlight Month and press the backspace key to erase the current
value. Then type in a new value.