Product manual

Chapter 5: SmartNAVI
183
SmartNAVI starts automatically the next time you reboot your PC. If you want to
start SmartNAVI without rebooting your PC, go to the Start menu. See “Starting
SmartNAVI” on page 181.
Working with the Device List
• Adding NAS Devices (page 184)
• Logging Into a NAS Device (page 185)
• Changing NAS Device Settings (page 188)
• Deleting a NAS Device (page 188)
The SmartNAVI Device List shows the NAS devices on your network. A NAS
device is a logical drive with the NAS feature enabled. The NAS device is listed
by the unit number and IP address of the VessRAID subsystem.
For information about how to create NAS enabled logical drives, See page 51 or
page 160. Also see “Appendix A: Setting-up NAS Network Drives” on page 419.
The Device List shows NAS devices as:
• Blue icon, bold type – Currently selected
• Blue icon – Detected and available
• Gray icon – Previously detected but not currently available
The version number of the SmartNAVI software is listed under System
Information.
Available
SmartNAVI
version number
Selected
Not available