Product manual

VessRAID 1000f, 1000i, 1000s Product Manual
84
To make changes to the iSCSI Port settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Network Management icon.
4. Click the iSCSI Ports tab.
5. Click one of the Port Configuration links.
6. To enable DHCP, check the DHCP box.
When DHCP is NOT enabled, enter:
• Primary IP address
• Primary subnet mask
• Default gateway IP address
7. Enter a TCP port number.
3260 is the default and recommended for most applications.
8. Click the Submit button.
Creating a Link Aggregation Entry
Link aggregation combines multiple network ports in parallel to increase link
speed and to provide redundancy for high availability. This feature enables you to
aggregate the iSCSI data ports on your subsystem.
To create a link aggregation entry:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Network Management icon.
4. In Management View, from the dropdown menu on the Link Aggregation
tab, choose Create Link Aggregation Entry.
5. Enter a Trunk ID number.
Use 1 to 32.
6. From the Master Port dropdown menu, choose an iSCSI port number.
7. From the Slave Port dropdown menu, choose another iSCSI port number.
8. Click the Submit button.