Product manual

Chapter 4: Management with WebPAM PROe
83
Managing the Network Connection
The network connection deals with the VessRAID’s Management Port.
• Making Management Port Settings (below)
• Making iSCSI Port Settings (page 83)
• Creating a Link Aggregation Entry (page 84)
• Viewing Link Aggregation Entries (page 85)
• Changing a Link Aggregation Entry (page 85)
• Changing a Link Aggregation Entry (page 85)
Making Management Port Settings
When you log into WebPAM PROe over your network, you use the VessRAID’s
management port.
Before you change settings, please see “Choosing DHCP or a Static IP Address”
on page 42.
To make changes to the Management Port settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Network Management icon.
4. Click the Port Configuration link in Management View.
5. To enable DHCP, check the DHCP box.
When DHCP is NOT enabled, enter:
• Primary IP address
• Primary subnet mask
• Default gateway IP address
• Enter a primary DNS server IP address.
6. To enable Wake on LAN feature, check the Wake On LAN box.
Wake on LAN must be enabled to power off and power on the VessRAID
NAS from SmartNAVI. See “Powering On a NAS Device” on page 187.
7. Click the Submit button.
Making iSCSI Port Settings
VessRAID iSCSI models have four iSCSI ports. VessRAID FC models have two
iSCSI ports. You must make network settings to each iSCSI port individually.
Before you change settings, please see “Choosing DHCP or a Static IP Address”
on page 42.