Product manual

VessRAID 1000s Series Product Manual

Creating Disk Arrays with WebPAM PROe

Setting up disk arrays with WebPAM PROe consists of the following actions:

• Logging into WebPAM PROe (below)

• Choosing a Language (page 34)

• Creating a Disk Array (page 34)

• Logging out of WebPAM PROe (page 38)

Logging into WebPAM PROe

1. Launch your Browser.

2. In the Browser address field, type the IP address of the VessRAID

subsystem. See “Setting up the Serial Connection” on page 25.

Note that the IP address shown below is only an example. The IP address

you type into your browser will be different.

Regular Connection

• WebPAM PROe uses an HTTP connection. . . . . . . . . . . . . . . .http://

• Enter the VessRAID’s IP address . . . . . . . . . . . . . . . 192.168.10.85

Together, your entry looks like this:

http://192.168.10.85

Secure Connection

• WebPAM PROe uses a secure HTTP connection. . . . . . . . . .https://

• Enter the VessRAID’s IP address . . . . . . . . . . . . . . . 192.168.10.85

Together, your entry looks like this:

https://192.168.10.85

Note

You can also use the CLU or the LCD panel to create disk arrays

and logical drives. See page 148 or page 206 for more

information.

Note

Whether you select a regular or a secure connection, your login to

WebPAM PROe and your user password are always secure.