Product manual

VessRAID 1000s Series Product Manual
212
The display shows the default read policy.
The choices are ReadCache, ReadAhead and None.
14. Press the or button until the display shows the read policy you want.
15. Press the button to choose the read policy shown on the screen.
The display shows the default write policy.
The choices are WriteBack and WriteThru (write though).
16. Press the or button until the display shows the write policy you want.
17. Press the button to choose the write policy shown on the screen.
18. Press the button again to confirm.
The display shows the logical drive creation process. When the creation is
finished, the LCD returns to Logical Disk Create.
Deleting a Logical Drive
To delete a logical drive from a disk array:
1. Press the or button until the display says Array Configure.
2. Press the button and the display says Auto Configure.
3. Press the or button until the display says Advanced Configure.
4. Press the or button until the display says Logical Drive Delete.
5. Press the button again to display a list of logical drives.
6. Press the or button choose a logical drive for deletion.
7. Press the button and the display says Delete Logical Drive X?
8. Press the button again and the display says Are you sure? NO.
9. Press the button to change the answer to YES, then press the
button.
10. Press the button again to confirm.
The chosen logical drive is deleted.
Caution
When you delete a logical drive, you delete all the data it contains.
Back up all important data before deleting a logical drive.