Product manual

Managing SAS Connections
201
• Press button and the button to choose SAS Port 2.
4. Press the or button to scroll to Signal Strength.
5. Press the button to highlight the current value.
6. Press the or button to increment or decrement the value.
The range is 1 to 8. 1 is the default. Signal strength correlates to cable length
in meters. Example: If you have a 2 m SAS cable, set signal strength to 2. If
performance is unsatisfactory try settings of 1 and 3, then use the best
setting for your system.
7. Press the button again to set the value.