User Manual

STEP 1: SHUT DOWN SYSTEM, DISCONNECT POWER
Before opening the system housing, shut down the device and disconnect any power cords.
STEP 2: REMOVE HOUSING COVER
Remove housing cover
1. Use a small Phillips head screwdriver to remove all fi ve screws that secure the cover to the rest of the
device housing. There are two small fl at head machine screws, one on each side, and three dome head
machine screws that secure the cover to the backplate.
2. Slide the cover toward the rear of the device until it can be lifted off.
54
Vess A2000 Series Product Manual