User Manual

244
Vess A2000 Series Product Manual
REINSTALL LINUX
Follow the instructions below to reinstall the Linux OS. Notice that Windows Image
Writer is also used for the creation of the boot image. So you will need another computer
running Windows to perform this procedure.
1. Download ImageWriter.exe (see instructions on previous page).
2. Download latest Vess A2000 Series Linux image.
3. Insert the USB fl ash drive into your computer.
4. Use the Select USB drive menu to choose the drive letter of the USB fl ash
memory device, then use the Select Image button to locate the image fi le you
downloaded. When you have the USB drive letter and image fi le location selected,
click Write! to begin. The process takes a few minutes. A boot image is written to
the USB device.
5. Insert the USB drive into the Linux Vess A2000 Series and boot up.
6. You are prompted to select a destination for the Linux OS installation. Select
“Internal fl ash” since this is the default location it will be selected automatically if
you take no action.
7. You are prompted again to proceed or cancel. Enter “u” for Update, and the
installation process launches.