User Manual

VESS A2200 BACKPLATE CONNECTIONS
Access to physical data and management connections are located on the backplate of the Vess A2200/A2200s
including the optional I/O connections for sensor and alarm systems.
Feature Description
HDMI Provides video out connection for HDMI enabled monitors used to view the management
interface using CLI, CLU or WebPAM PROe.
VGA This is also used for a video out connection for VGA monitors, it is also used to view the
management interface using CLI, CLU or WebPAM PROe.
USB The backplate of the A2200/A2200s features two USB 2.0 and two USB 3.0 ports. Use to
connect to a USB keyboard for managing the Vess A2000 Series, or use it to transfer data
to or from a USB memory device.
RS-232
Port 1
This is used for control line connection to an uninterruptible power supply (UPS).
RS-232
Port 2
Use this to connect to analog cameras via the analog camera input cable.
Note: This connector cannot be used at the same time as the RS-422/485 connector.
Audio In Use for input from a peripheral audio device, such as a microphone. Plug-In Power micro-
phones are supported.
Audio Out Use for output (line out) peripheral audio device (speakers, for example).
RS-422/
RS-485
Use this to connect to analog cameras via the analog camera input cable.
Note: This connector cannot be used at the same time as the RS-232 connector.
Note
Analog camera connections are available through either the RS-232 Port 2 or the
RS-422/RS-485 connections. These cannot be used simultaneously.
18
Vess A2000 Series Product Manual