User Manual

SNMP Settings (CLU)
By default, Simple Network Management Protocol (SNMP) service is set to Automatic and its normal
status is Started.
To make SNMP service settings:
1.
Main Menu >> Additional Info and Management >> Software Management >> SNMP
>> Startup Type
2. Press the spacebar to toggle between Automatic and Manual.
3. Highlight the following and press the backspace key to erase the current value, then type the
new value:
• Port Number – 161 is the default
•
System Name – (optional) Type a system name in this fi eld
•
System Location – Type a country name in this fi eld
•
System Contact – Type the email address of your system administrator in this fi eld
•
Read Community – Type a community name in this fi eld
4. Press Control-A to save your settings.
To start, stop or restart the SNMP service, highlight
Start, Stop, or Restart and press Enter.
162
Vess A2000 Series Product Manual