User Manual

Making Spare Drive Settings (CLU)
To change spare drive settings:
1.
Main Menu >> Spare Drive Management
A list of the current spare drives appears, including the following parameters:
2. Highlight the spare drive you want to change and press
Enter.
3. Highlight the setting you want to change:
• Revertible – A revertible drive can be returned to spare status
after you replace the failed drive in a disk array.
•
Type – Dedicated means this spare drive can only be used with the specifi ed
disk arrays. Global means this spare drive can be used by any disk array.
4. Press the spacebar to toggle between the choices.
5. For dedicated spares, type the array number the spare is assigned to.
6. Press
Control-A to save your settings.
Running Spare Check (CLU)
To run Spare Check:
1.
Main Menu >> Spare Drive Management
A list of the current spare drives appears.
2. Highlight the spare drive you want to check and press
Enter.
3. Highlight
Start Spare Check and press Enter.
The results appear next to Spare Check Status in the same window. Healthy means normal.
141
Promise Technologies Management with CLU