User Manual

SLP Settings (CLU)
By default, SLP service is set to Automatic and its normal status is Started.
To make SLP service settings:
1.
Main Menu >> Additional Info and Management >> Software Management >> SLP
>> Startup Type
2. Press the spacebar to toggle between Automatic and Manual.
3. Press
Control-A to save your settings.
To start, stop or restart the SLP service, highlight
Start, Stop, or Restart and press Enter.
Web Server Settings (CLU)
By default, Web Server service is set to Automatic and its normal status is Started.
To make Web Server service settings:
1.
Main Menu >> Additional Info and Management >> Software Management >>
Startup Type
2. Press the spacebar to toggle between Automatic and Manual.
3. Highlight the following and press the backspace key to erase the current value, then type the
new value:
• HTTP Port (8090 is the default)
• Session Time Out (24 minutes is the default. 1440 minutes = 24 hours)
4. Highlight SSL and press the spacebar to toggle between Enabled and Disabled.
5. Highlight
HTTPS Port and press the backspace key to erase the current value, then type the
new value. 443 is the default.
6. Press
Control-A to save your settings.
To start, stop or restart the service, highlight
Start, Stop, or Restart and press Enter.
Note
SLP is supported on the Linux OS version only.
161
Promise Technologies Management with CLU