User Manual

Access CLI in Windows
For Windows 7 installations, once the system has booted up it will be necessary to choose various
options to complete the OS setup. You will be prompted to select a default language and other user
interface preferences. Follow the instructions on screen to complete your preferences selection and
to establish a user name and password for the administrator. After completing these fi nal tasks, the
Windows 7 desktop appears.
To use the CLU interface, fi rst open the CLI terminal interface:
1. Go to Start > Run and click the Browse button.
2. Navigate to the C:\PromiseApp\clitest
folder.
3. Click clitest.exe fi le then click the Open button.
4. Click the OK button in the Run dialog box.
The CLI window opens. See “Using the CLU” below for instructions for instructions on how to
access the CLU interface.
Access CLI Interface - Linux
After the Vess system is fully booted up, a login screen appears. Type in the default user name:
root and default password: password to continue to the desktop of the installed Linux OS.
To use the CLU interface, fi rst follow these directions to access the PROMISE CLI Utility:
5. Open a terminal window.
6. Type
clitest and press Enter.
The CLI runs in the terminal window. See “Using the CLU” below for instructions on how to
access the CLU interface.
Important
DO NOT move any fi les from or copy any fi les to the PromiseApp folder
on the C Drive [C:\PromiseApp] in the Windows OS.
105
Promise Technologies Management with CLU