User Manual

Gigabit Ethernet port LEDs

Fan Status

REAR PANEL LEDS AFTER POWER ON - VESS A2600/A2600S

When system boot-up is ﬁ nished, use the LEDs on the controller on the rear of the device to monitor various

functions (described below).

LED Description (refer to product manual for more details)

System Fan

A steady GREEN LED indicates normal fan function. A RED LED indicates fan failure, the

fan must be replaced.

Ethernet

Link/Act and Speed

The LED located on below each port, on the left side, lights green when connected, ﬂ ashes

green when there is activity on the port and remains dark no connection has been estab-

lished. The LED on the lower right of each port indicates connection speed, green is 100

Mbps, ORANGE is 1000 Mbps.

Vess A2600/A2600s rear panel LEDs

Promise Technologies Hardware Setup