User Manual

VESS A2200 BACKPLATE LED INDICATORS

The LEDs on the backplate include LEDs for System Fan and Ethernet data ports. The Vess A2200 also has an

LED on each of the hot-swappable PSUs.

LED Description

Ethernet

Link/Act and

Speed

The LED located below each port, on the left side, lights GREEN when connected, ﬂ ashes

GREEN when there is activity on the port and remains dark no connection has been estab-

lished. The LED on the lower right of each port indicates connection speed, GREEN is 100

Mbps, ORANGE is 1000 Mbps.

PSU

(Vess A2600)

The power supply LEDs on the A2600 light GREEN to indicate normal operation. A RED

LED indicates a problem or unit failure.

Ports and LEDs on rear panel of Vess A2200/A2200s

1 2 3 4

Network ports and LED indicators

USB Ports

Two USB 2.0 / Two USB 3.0

RS-422 / RS-485 ports

Sensor input / Alarm output

Audio Out (top, yellow)

Audio In (bottom, pink)

RS-232

Port 1

Port 2

VGA port

HDMI port

Promise Technologies Introduction