User Manual

STEP 3: INSERT PCIE CARD
Removal of the cover exposes the PCIe slots located in the rear left corner.
1. Pull out the protective cover for the PCIe opening for the slot that will be used. Save this protective cover
for future use.
2. Insert the PCIe card so that it is fi rmly seated in the PCIe slot. When properly seated, the bracket
will fl ush with the backplate of the device allowing access to the PCIe functional connection. It is not
necessary to anchor the bracket with a screw since the housing cover will hold the card securely in place
when the device is completely reassembled.
Remove PCIe cover and insert card
55
Promise Technologies Hardware Setup