User manual

Chapter 4: Management with SuperBuild™
81
Working with the Buzzer
The buzzer sounds to inform you that your RAID system needs attention. But the
buzzer does not specify the condition. When a continuous tone sounds, there are
multiple alarm patterns sounding at the same time.
When the buzzer sounds, check your disk arrays and logical drives.
To silence the buzzer for the current trigger event, you must disable it.
Also see “Chapter 8: Troubleshooting” on page 183.
Enabling or Disabling the Buzzer
To enable or disable the Buzzer:
1. In the Main Menu, highlight Miscellaneous and press Enter.
2. Highlight Buzzer and press Enter.
3. Highlight your choice and press Enter.
• Enable
•Disable