User manual

Chapter 4: Management with SuperBuild™
73
Managing Logical Drives
Logical drive management includes these functions:
• Viewing Logical Drives (page 73)
• Viewing Logical Drive Information (page 73)
• Creating a Logical Drive (page 74)
• Initializing a Logical Drive (page 75)
• Changing Logical Drive Settings (page 76)
• Deleting a Logical Drive (page 76)
Viewing Logical Drives
To view your logical drives:
1. In the Main Menu, highlight Logical Drive Management and press Enter.
The Logical Drive Management screen displays the following information:
ID – The consecutive number of the logical drive in the order it was created,
beginning with 0
Logical Drive Name – The user-assigned name for the logical drive
Capacity – Data capacity of the logical drive in GB
Status – OK is normal. Can also show Critical or Offline.
2. Highlight Return to Previous Menu and press Enter.
Viewing Logical Drive Information
To view logical drive information:
1. In the Main Menu, highlight Logical Drive Management and press Enter.
The Logical Drive Management screen displays.
2. Highlight the logical drive you want to see and press Enter.
The Logical Drive Info and Setting screen displays. The information includes:
Logical Drive ID – The consecutive number of the logical drive in the order it
was created, beginning with 0.
Logical Drive Name – You can change this setting.
Note
For an explanation of the logical drive concepts and the choices
you can make when you create your logical drive, see “Chapter 7:
Technology Background” on page 167.
For information about logical drive problems, see “Chapter 8:
Troubleshooting” on page 183.