User manual

SuperTrak TX Series User Manual
70
Managing Disk Arrays
Disk array management includes these functions:
• Viewing Disk Arrays (page 70)
• Viewing Disk Array Information (page 70)
• Creating a Disk Array (page 71)
• Rebuilding a Disk Array (page 71)
• Rebuilding a Disk Array (page 71)
• Deleting a Disk Array (page 72)
Viewing Disk Arrays
The SuperBuild utility displays information about the disk arrays managed by the
SuperTrak controller.
1. In the Main Menu, highlight Disk Array Management and press Enter.
The information includes:
ID – The consecutive number of the disk array in the order it was created,
beginning with 0.
Capacity – Data capacity of the disk array in GB.
Status – OK is normal. Can also show Critical or Incomplete.
2. Highlight Return to Previous Menu and press Enter.
Viewing Disk Array Information
To view disk array information:
1. In the Main Menu, highlight Disk Array Management and press Enter.
The Disk Array Management screen displays.
2. Highlight the Disk Array you want to see and press Enter.
The Disk Array Info and Setting screen displays. The information includes:
Disk Array ID – The consecutive number of the disk array in the order it was
created, beginning with 0
Capacity (Configurable) – Usable data capacity of the disk array in GB
Capacity (Free) – Total data capacity of the disk array in GB
Number of Physical Drives – Number of physical drives in this disk array
Number of Logical Drives – Number of logical drives in this disk array
Status – OK is normal. Can also show Critical or Incomplete.
3. Highlight Physical Drives in the Disk Array and press Enter.