User manual

Chapter 3: Installing Drivers
57
Existing System
After installing the SuperTrak TX Series RAID Controller card and rebooting your
system, Windows Server 2008 setup will show a “Found New Hardware” dialog
box.
1. Choose the Locate and install driver software option and click the Next
button.
The “Found New Hardware – RAID Controller” dialog box displays the
message: “Allow Windows to search online for driver software for your RAID
Controller?”
2. Choose the Don’t search online option.
The “Found New Hardware – RAID Controller” dialog box displays the
message: “Insert the disc that came with your RAID Controller.”
3. Insert the driver diskette into the floppy drive and click the Next button.
Windows loads the driver and displays the “Found New Hardware” dialog
box with message: “Windows has finished installing the driver software for
this device Promise SuperTrak TX [8650, 8658] (tm) Controller.”
4. Click the Close button to finish driver installation.
Confirming Driver Installation
1. Right-click the My Computer icon and choose Manage from the popup
menu.
2. From the left panel, choose Device Manager.
3. Click the + in front of Storage controllers. “Promise SuperTrak TX [8650,
8658] (tm) Controller” and “Promise Raid Console” should appear.