User manual

Chapter 2: Installation
31
Internet Browser
Typically an Internet browser comes with your operating system. The
WebPAM PRO installer does not include a browser. For computers that will
remotely monitor and manage the RAID, the browser is the only software
required.
Browser Support
Choose the latest version of the following browsers to use with WebPAM PRO:
• Internet Explorer
•Firefox
• Netscape Navigator
If you do not have one of the above browsers on the Host PC, install the browser
first and make it the default browser. Then install WebPAM PRO.
Go to one of the following procedures:
• “Installing WebPAM PRO onto Windows” below.
• “Installing WebPAM PRO onto Linux” on page 40.
Installing WebPAM PRO onto Windows
To install WebPAM PRO onto your Windows-based PC or server:
1. Boot the PC or server, launch Windows, and log in as the Administrator.
If the computer is already running, exit all programs. If you are not logged in
as the Administrator, log out, then log in again as the Administrator.
2. Insert the Software CD into your CD-ROM drive.
The installer window opens automatically.
3. Click the WebPAM PRO Software button, then click the Install WebPAM
PRO for Windows button.
The first WebPAM PRO installation dialog box appears.
Important
Install the SuperTrak driver for your operating system before
installing WebPAM PRO. See “Chapter 3: Installing Drivers” on
page 53 for instructions.
Caution
If you have WebPAM or an earlier version of WebPAM PRO on
your PC or server, manually uninstall them before you install
WebPAM PRO from the Software CD.