User manual

Chapter 2: Installation
17
At this point you can create additional logical drives, if there is physical drive
space available. To create another logical drive, repeat steps 8 through 14
above.
15. Press the F10 key to exit the SuperBuild utility and press Y to confirm and
restart the computer.
Do not press the Ctrl-Alt-Del keys. Do not press the Esc key.
You have successfully created a new RAID logical drive.
Important
You must be partition and format your new logical drive before you
can use it. Use the same method of partitioning and formatting a
logical drive as you would any other fixed disk added to your
computer system.
Logical Drive Management
ID Logical Drive Name Capacity Status
0 LogDrv A 470.814 GB Ok
- - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
Create Logical Drive
Delete Selected Logical Drive
Return to Previous Menu