User manual

SuperTrak TX Series User Manual
14
3. Press the arrow keys to highlight Disk Array Management and press Enter.
The Disk Array Management screen appears.
4. Highlight Create Disk Array and press Enter.
The Create Disk Array screen appears.
Use this screen to select the physical drives for your disk array.
5. Press the arrow keys to highlight a physical drive. Then press the spacebar
to select the physical drive.
An asterisk (*) appears at the left of each selected physical drive.
The first number under ID refers to the enclosure. The second pair of
numbers refer to the individual physical drive.
6. Highlight Save Configuration and press Enter.
The Disk Array Management screen appears, showing your new disk array
Main Menu
Controller Information
Physical Drive Management
Disk Array Management
Logical Drive Management
Spare Drive Management
Event Log
Miscellaneous
Disk Array Management
ID Capacity Status
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
Create Disk Array
Delete Selected Disk Arrays
Return to Previous Menu
Create Disk Array
Select Physical Drives :
ID Model Name Capacity Status
*00:01:00 WDC WD1600YS 153.25 GB Ok
*00:02:00 WDC WD1600YS 153.25 GB Ok
*00:03:00 WDC WD1600YS 153.25 GB Ok
*00:04:00 WDC WD1600YS 153.25 GB Ok
- - - -
- - - -
- - - -
- - - -
Save Configuration
Return to Previous Menu