User manual

Chapter 2: Installation

Creating a Logical Drive

You can use the SuperBuild™ Utility to create a logical drive with the attached

physical drives. You can also use WebPAM PRO and the Command Line

Interface (CLI) to create your logical drives.

1. Boot your system. If this is the first time you have booted with the SuperTrak

card and physical drives installed, the SuperTrak BIOS will display the

following screen.

2. Press the Ctrl-S keys to display the SuperBuild Utility Main Menu.

Note

For an explanation of the logical drive concepts and the choices

you can make when you create your logical drive, see “Chapter 7:

Technology Background” on page 167.

SuperTrak TX Series BIOS Version 3.0.0.26

Controller 1:

ID Logical Drive Name Capacity Status

----------------------------------------------------

No Logical Drive is defined ...

Press <Ctrl> + <S> to enter SuperBuild (tm) Configuration Utility or

Press <Esc> or <Space> to continue

Main Menu

:Navigate, ENTER:Enter, SPACE:Select, ESC:Back/Cancel, F10:Exit

Main Menu

Controller Information

Physical Drive Management

Disk Array Management

Logical Drive Management

Spare Drive Management

Miscellaneous