User manual

SuperTrak TX Series User Manual
8
Installing the SuperTrak Card
The SuperTrak TX Controller card fits into any available PCI-Express x8 slot. You
can also plug the SuperTrak card into a PCI-Express x16 slot.
1. Remove the cover of your system.
2. Remove the inside slot cover of an available PCI-Express slot on the
motherboard.
Warning
Before installing the SuperTrak TX Controller card into an existing
system, backup any important or useful data. Failure to follow this
accepted PC practice could result in data loss.
Important
Promise does not recommend multi-lane and fanout cables longer
than 1m (38 inches) because they have not been tested with the
SuperTrak controller.
Note
The SuperTrak TX Controller cards are PCI Plug-n-Play (PnP)
devices. No changes are necessary in the motherboard CMOS or
BIOS Setup for resources or drive types in most applications.