User manual

Chapter 8: Troubleshooting
187
Problems Reported in WebPAM PRO
Open WebPAM PRO
If WebPAM PRO is not running, do the following actions:
1. Open WebPAM PRO.
See “Logging into WebPAM PRO” on page 83 for more information.
2. Click Subsystem in Tree View.
3. Click Enclosures and its subordinates.
4. Click Disk Arrays and its subordinates.
What to Look For
When a logical drive goes critical or offline, WebPAM PRO reports the condition
in the following ways:
• Displays yellow !s red Xs in Tree View (below)
• Sends email messages, per your configuration
• Displays popup messages, per your configuration (below)