User manual

Chapter 8: Troubleshooting
185
BIOS
The problem is first reported in the SuperTrak BIOS screen when you boot your
PC or server, as shown below.
Figure 1. SuperTrak BIOS screen, logical drive critical
If the SuperTrak BIOS detects an Critical logical drive, the BIOS reports the
condition but allows the booting process of the Host PC to continue.
Choose a Management application:
• Press Ctrl-S at the BIOS screen to open the SuperBuild utility.
• Allow your OS to boot, then open WebPAM PRO.
SuperTrak TX Series BIOS Version 3.0.0.26
(c) 2004-2008 Promise Technology, Inc. All rights reserved.
Controller 1:
ID Logical Drive Name Capacity Status
----------------------------------------------------
0 LogDrv01 55.0 GB Critical
1 LogDrv02 58.0 GB Critical
Press <Ctrl> + <S> to enter SuperBuild (tm) Configuration Utility or
Press <Esc> or <Space> to continue