User manual

SuperTrak TX Series User Manual
164
Specifies the disk array ID. Requires the -a list option.
Displays a list of global spares and spares dedicated to
this disk array.
When used with other actions, it specifies the disk array
IDs to which this spare is dedicated.
-t <type> Specifies the type of hot spare drive.
g A global hot spare drive.
d A dedicated hot spare drive.
Examples
spare
spare -a add -p 14 -t g
spare -a del -i 0
spath
Usage
spath [-a list] [-t <type> -p <path #>]
spath -a discover
spath -a chgpath [-t <type> -p <path #>]
Summary
The spath command discovers and changes subsystem paths.
Options
-a <action> Which action to perform.
list (Default) Lists the subsystem paths that have been
discovered.
discover Discovers subsystem paths.
chgpath Changes the current subsystem path to the new specified
path.
If -t <type> -p <path #> is not specified, it will list the
current subsystem path.
-t <type> Specifies the type of path.
hba HBA.
subsys Subsystem.
With the -a list option, the default is both HBA and
Subsystem.
With the -a chgpath options, you must specify -t and -p to
change the path.
You cannot use the -t option with the -a discover option.