User manual

Chapter 6: Management with the CLI
161
Options
-a <action> Specifies the action to perform.
list (Default) Displays all physical drives, their make, model
number, and array they belong to. Their status is also
shown.
mod Modifies physical drive settings.
locate Flashes the physical drive's LED so you can location it.
online Forces a drive from an Offline to an Online state.
Caution: Do this action only in extreme conditions. It
causes data corruption in most cases.
-p <PD ID> Specifies the physical drive ID.
-c <count> Specifies number of drives when their ID numbers are
sequential.
-v Verbose mode. Used with -a list.
Examples
phydrv
phydrv -v
phydrv -a locate -p 9
phydrv -a online -p 8
rb
Usage
rb [-a <action>] [-d <DaId>] [-s <SeqNo>]
rb -a start -d <DaId> -s <SeqNo> -p <PdId>
rb -a stop -d <DaId> -s <SeqNo>
rb -a pause -d <DaId> -s <SeqNo>
rb -a resume -d <DaId> -s <SeqNo>
Summary
The rb command starts, stops, pauses, and resumes a Rebuild and monitors the
progress of a running Rebuild.
Options
-a <action> Specifies action to perform.
list (Default) Displays the running and paused Rebuilds and
their status.
start Starts a manual Rebuild.