User manual

SuperTrak TX Series User Manual
158
Options
-a <action> Specifies the action to perform.
list Displays a list of the initializations in progress or paused
and their status. The default action.
-l <LD ID> Specifies the logical drive to be initialized.
-q <size> Specifies the amount of data in megabytes (MB) for a
quick initialization.
1..1024
Examples
init
init -a start -l0 -q5
logdrv
Usage
logdrv [-a <action>] [-l <LdId>] [-c <Ld count>] [-v]
logdrv -a locate -l <LdID>
logdrv -a mod -l <LdId> -s "<list of ld settings>"
Summary
The logdrv command displays information about the logical drives and changes
logical drive settings.
To create a logical drive, see the array command on page 147.
Options
-a <action> Specifies the action to perform.
list (Default) Displays a summary of one or more logical
drives.
mod Changes logical drive settings.
locate Locates a logical drive within the enclosure by flashing
drive carrier LEDs.
-l [<LD ID>] Logical drive ID.
-c [<LD count>] Logical drive count. Requires the -a list option.
Warning
When you initialize a logical drive, you delete all data on the
logical drive. Backup any important data before you initialize!