User manual

Chapter 6: Management with the CLI
157
Examples
export -t userdb -s 192.168.1.1 -f userdb.bin
export -t servicereport -s 192.168.1.1 -f servicereport
export -t servicereport -f servicereport
factorydefaults
Usage
factorydefaults -a <action> -t <type>
Summary
The factorydefaults command restores factory default settings.
Options
-a <action> Specifies the action to perform.
restore Restore the factory default settings.
-t <type> Specifies the type of settings to restore.
all All settings.
bga Background activity settings.
ctrl Controller settings.
encl Enclosure settings.
phydrv Physical drive settings.
Examples
factorydefaults -a restore -t phydrv
factorydefaults -a restore -t all
init
Usage
init [-a <action>] [-l <LdId>]
Summary
The init command starts, stops, pauses, and resumes a logical drive initialization.
A quick initialization writes to the first and last few megabytes of the logical drive.
Typically, a quick initialization is completed in moments. Full initiation is not
supported on the SuperTrak TX series.