User manual

Chapter 6: Management with the CLI
155
cacheflushinterval= Sets the time interval in seconds to flush the controller
writeback cache.
1..12
migrationstorage= Sets location to store the migration watermark.
ddf Uses the DDF area on the physical drives of the disk
array.
nvram Uses the NVRAM on the controller.
pollinterval= Sets interval in seconds to poll enclosure SEP
information.
15..255
-t <condition type> Specifies the type of condition to clear.
Valid only when the command action is "clear".
-l Displays the id of the controller on whose serial port the
CLI is running.
-v Verbose mode. Used with the -a list option.
Examples
ctrl
ctrl -v
ctrl -l
ctrl -a mod -i 1 smart=enable smartpollinginterval=50
event
Usage
event [-a <action>] [-l <location>] [-i <SeqNo>] [-c <event count>] [-v]
event -a clear [-l <location>]
Summary
The event command displays and clears the RAM and NVRAM event logs.
Options
-a <action> Specified the action to perform.
list Displays the events for the specified location.
RAM events are displayed if no location is specified.
clear Clear events for a specified location.
-l <location> Specifies the location from which to display or clear
events.
ram All events are stored in RAM.
These events are lost after rebooting.