User manual

SuperTrak TX Series User Manual
150
information on page 154. If not specified, the default
512 B is used.
Axle= RAID10 has 2 axles, no options.
PreferredCtrlId= Subsystems only. Specifies which controller the LD is
preferred for LUN affinity. Valid value is 1 or 2. If value is
not specified, LUN affinity is auto balanced.
-c <array count> Specifies the number of arrays to give a summary of
when used with the -a list option. For example 'array -a
list -c3' will give a summary for the first 3 arrays on that
controller.
<Ld count> Specifies the number of logical drives to be created with
the -a add option. With the -c option, all the logical drives
have same settings but only one -l option=value can be
specified.
-t <condition type> Specifies the type of incomplete condition to accept. If not
specified, it will accept the current incomplete condition
by default.
missingdrive The condition of missing drive in the array.
-v Verbose mode. Displays all array properties, requires -a list option.
Examples
array -v -c 1
array -a add -s "mediapatrol=enable" -p 1,3,5~8
-l "raid=10,capacity=50gb,stripe=128kb,sector=1kb"
array -a add -p 1,3,5~8 -l "raid=10,capacity=50gb,stripe=256kb"
-l "raid=0,capacity=100gb"
array -a mod -d 1 -s "alias=YourArray,mediapatrol=disable"
array -a del -d 3
array -a locate -d 0
array -a accept -d 2
array -a addld -d 0 -l "raid=1,capacity=125gb"
array -a delld -l 1
bga
Usage
bga [-a <action>]
bga -a mod -s "<list of settings>"